The Port Authority of New York and New Jersey Bus (PANYNJ) Texture Pack

Disclaimer: I am very sorry that I was not successful in removing the Presto readers off the bus since PANYNJ buses does not use Presto as its fare payment system. So the Presto readers are always going to be in the bus when you spawn these.

Installation instructions:

1. First, you need to install the Toronto Transit Commission Bus Pack by SCPDArmor23. (This is very important because it has the New Flyer D40LF and the Orion VII models).
Link: https://www.gta5-mods.com/vehicles/replace-addon-greater-toronto-bus-transit-multipack-part-1

2. After you installed the pack, open up OpenIV and navigate to "mods/update/x64/dlcpacks/ttc/dlc.rpf/x64/levels/gta5/vehicles/vehicles.rpf". (IMPORTANT: Make sure you are in Edit Mode)


I will tell you step by step on how to get my PANYNJ bus textures installed:

For the Orion VII HEV and Orion VII diesel:
1. Find the bus.ytd file (Orion VII HEV) and the airbus.ytd file (Orion VII Diesel). 
Please note: If you are installing my PANYNJ Orion VII Diesel textures, I recommend you to import my textures in the airbus.ytd and not ttcviidiesel.ytd (even though there is a diesel Orion VII in TTC livery).
Why? Because you mostly see the PANYNJ Orion VIIs in airports especially LaGuardia Airport, JFK Airport and EWR Airport.

2. Import all my textures into the respective ytd files (bus.ytd for the Orion VII HEV, find the Orion VII Hybrid folder and import my textures into it) (airbus.ytd for the Orion VII Diesel Airport, find the Orion VII Diesel folder
and import my textures into it). Once you have done that, Click "Save".

For the New Flyer D40LF:

1. You would have to choose any of the three options that you want to install it with. 
The reason is because SCPDArmor23's buses have a maximum limit of 5 liveries. This is very important. If you import more than 5 liveries, the bus will not spawn right. It will have liveries that are messed up.
Note: Choose either of the following folders: Option 1, Option 2, or Option 3

2. Once you have chosen which one of the folders you want to install. Open up the ttcd40lf.ytd file and import my textures (that you choose in one of the 3 options) into it. Click Save.

3. Installation finished.

Updates:
1.0 - Initial release
1.1 - Changes to the destination signs so that they use proper Luminator destination signs. Also lowered the brightness for the destination signs.
The reason is, there's users who use graphics mods and find that the destination signs too bright. So I had to lower the brightness for the destination
signs that make it compatible to those who use graphics mods.

Credits:
SCPDArmor23 - Orion VII and New Flyer D40LF models
BenTheMiner - Realistic Luminator signs fonts